Division commander control machine with upgraded intelligence and surveillance system
DOI:
https://doi.org/10.34169/2414-0651.2021.2(30).30-34Keywords:
military equipment, command machine control, intelligence system, operator’s workplase, data transfer, automation of measurement, onboard computer, information technologyAbstract
The article deals with the issues of modernizing control machines of the division commander by improving the characteristics of the reconnaissance and targeting system based on a lifting the multi-channel surveillance device when measuring the spatial coordinates of targets. Method of increasing the accuracy of determining the coordinates of the target, by lifting the surveillance system above the surface of the machines is proposed. This always leads to a change in the axis sight in the surveillance device when it lifting. Compensation of the angle horizontal displacement of the axis sight, proposed to hold joint processing by additional sensors, installed at the base of the surveillance device, which it lifting. This implementation has expanded
the possibilities of using machines in difficult real-world conditions and maintain targeting accuracy. The tests carried out on the prototype of the machine showed that the value of the error introduced by the mast in the horizontal plane is compensated to the level of 00-02 goniometer divisions. This makes it possible to use the available masts to lift the observation device.
When calculating the orientation of the vehicle body, a special device is used, built on the basis of laser triaxial gyroscopes, which is located in the vehicle body. The value of the target axis of sight is determined by recalculating the value of the misalignment of the target axis of sight in relation to the hull, taking into account the position of the machine tower, the mast with changes associated with its rise.
Downloads
References
Tkachuk, P.P., Budaretskyy, Yu.I., Shchavinskyy, Yu.V. & Prokopenko, V.V. (2015), “Vplyv zasobiv avtomatyzatsii i upravlinnia pidrozdilamy i vohnem artylerii na efektyvnist ii zastosuvannia”, [Infl uence of means of automation and management of divisions and artillery fi re on effi ciency of its application. Militarytechnical coll.], Viyskovo-tekhnichnyy zb. № 12. Pp. 75—82. Available at: http://www.nbuv.gov.ua//UJRN/vtzb (accessed 12.03.2021). DOI: https://doi.org/10.33577/2312-4458.12.2015.75-82
Fendrikov, N.M. & Yakovlev, V.I. (1971), “Metody raschetov boyevoi effektivnosti vooruzheniia” [Methods of calculating the combat effectiveness of weapons: a textbook], uchebnik, Voyenizdat, M. 224 p. Available at: https://www.twirpx.com/file/884631 (accessed 12.03.2021).
Venttsel, Ye.S. (1988), “Issledovanie operatsii. Zadachi, printsipy, metodologiia” [Operations research. Tasks, principles, methodology: textbook], Nauka, M. 208 p. Available at: https://www.twirpx.com/file/342820 (accessed 12.03.2021).
Oliyarnyk, B.O. & Yevtushenko, K.S. (2016), “Kompleks unifi kovanykh tekhnichnykh zasobiv dlia komandno-shtabnykh mashyn ta vohnevykh zasobiv artylerii” [A set of unifi ed technical means for command and staff vehicles and artillery fi re means], Ozbroyennia ta viyskova tekhnika. № 4(12). Pp. 37—41.
Oliyarnyk, B.O., Andriyenko, A.M., Vlasyuk, P.S. & Hurnovych, A.V. (2020) “Sposib pidvyshchennia tochnosti ta dalnosti rozvidky v komandyrskykh mashynakh upravlinnia artyleriiskym dyvizionom (batareieiu)” [A method of increasing the accuracy and range of reconnaissance in the command vehicles of the artillery division (battery)], zb. nauk. pr. K.: TSNDI OVT ZSU. № 2(77). Рр.179—183.
Downloads
Published
How to Cite
Issue
Section
