Results of the application of the method of scanning electron microscopy in the study of metal fragments of the 9M723 operational-tactical missile OTМK 9K720 «Iskander»

Authors
Keywords:
Array, Array, Array, Array, Array
Abstract

The article presents the results of a comprehensive study of fragments of the 9M723 operational-tactical missile of the 9K720 Iskander operational-tactical missile complex, manufactured by the aggressor country, using the method of scanning electron microscopy and X-ray microanalysis. The main objective of the study was to determine the chemical composition of the materials of the missile structures to create an information base that can be used to identify such missiles and develop effective countermeasure algorithms.

The chemical composition of the body and the cover of the 9M723 missile body was analyzed. It was found that the missile parts that were studied are made of low-alloy heat-resistant steel of the 15Kh5VF type and heat-resistant corrosion-resistant titanium alloy of the OT4-0 type.

The use of materials in the external structures of the 9M723 missile body that provide resistance to oxidation at temperatures up to +600 °C is due to the short flight time of the missile, during which it does not have time to reach critical temperatures of the main bearing surfaces.

These steels and alloys were developed, standardized and introduced into serial production during the era of the former USSR. This indicates the aggressor’s efforts to ensure maximum productivity of their production under sanctions pressure from advanced countries of the world.

The results of this study can be used to develop systems to counter similar missiles, as well as to optimize the production of similar missile systems based on the data obtained on the chemical composition of materials.

Author Biographies
  1. Viacheslav Bogdanov, Institute of Mechanics named S.P. Tymoshenko of the NAS of Ukraine

    Academician of the NAS of Ukraine, Doctor of Physics and Mathematics

  2. Oleksandr Grygorenko, Institute of Mechanics named S.P. Tymoshenko of the NAS of Ukraine

    Corresponding Member of the NAS of Ukraine, Doctor of Physics and Mathematics, Professor

  3. Igor Chepkov, Central Scientific Research Institute of Armament and Military Equipment of the Armed Forces of Ukraine

    Doctor of Technical Sciences, Professor

  4. Igor Odnoralov, Central Scientific Research Institute of Armament and Military Equipment of the Armed Forces of Ukraine

    Doctor of Technical Sciences, Senior Research

  5. Andrii Kuchinskyy, Central Scientific Research Institute of Armament and Military Equipment of the Armed Forces of Ukraine

    Candidate of Technical Sciences, Senior Scientist, Doctoral Student

  6. Valerii Kremenytskyi, Technical Center of NAS of Ukraine

    Candidate of Physics and Mathematics

  7. Svitlana Sperkach, Technical Center of NAS of Ukraine

    Candidate of Physics and Mathematics

References

Available at: https://militarnyi.com/uk/articles/otrk-yskander-zbroya-raketnogo-terroru.

Available at: https://drukarnia.com.ua/articles/nashadok-tochka-u-iskander-m-i-sho-take-kvaziballistichna-b0isd.

Available at: https://digest.kndise.gov.ua/wp-content/uploads/ 2025/08/70.pdf.

Viacheslav L. Bogdanov, Alexander Ya. Grigorenko, Ihor B. Chepkov, Ihor V. Odnoralov, Andrii V. Kuchynskyi, Valerii V. Kremenytskyi & Svitlana O. Sperkach. (2025). Identification of Special-Purpose Structures by Their Fragments Based on Scanning Electron Microscopy. Advanced Structured Materials. Springer Nature Switzerland AG. 406 p.

DOI: 10.1007/978-3-031-88827-4 https://doi.org/10.1007/978-3-031-88827-4

Bogdanov, V.L., Grigorenko, O.Ya., Chepkov, I.B., Odnoralov, I.V., Kremenytskyi, V.V. & Sperkach, S.O. (2023).“Identyfikatsiia krainy pokhodzhennia bezbilotnykh litalnykh aparativ na pidstavi analizu elementnoi bazy za metodom skanivnoi elektronnoi mikroskopiiˮ [Identification of the country of origin of unmanned aerial vehicles based on the analysis of the elemental base by the method of scanning electron microscopy], Weapons and military equipment. No. 1(37). Pp. 57—62.

https://doi.org/1034169/2414-0651.2023.1(37).57-62.

Bohdanov, V.L., Grigorenko, O.Ya., Chepkov, I.B., Odnoralov, I.V., Kuchinskyy, A.V., Kremenytskyi, V.V. & Sperkach S.O. (2023). “Zastosuvannia metodu skanuiuchoi elektronnoi mikroskopii pry vyznachenni khimichnogo skladu metalevykh fragmentiv krylatykh ta aviatsiinykh raket vyrobnytsva rosiiskoi federetsiiˮ [Application of the method of scanning electron microscopy in the determination of the chemical composition of metal fragments of cruise and aircraft missiles manufactured in the russian federation], Weapons and military equipment. No. 2(38). Pp. 18—25.

https://doi.org/1034169/2414-0651.2023.2(38).18-25.

“Marochnyk stali ta splavivˮ [Marochnik of steel and alloys]. Available at: https://www.splav-kharkov.com/main.php.

Cover Image
Published
2025-12-31
Section
AIR DEFENSE SYSTEMS
License

Copyright (c) 2025 В’ячеслав Богданов,Олександр Григоренко,Ігор Чепков,Ігор Одноралов,Андрій Кучинський,Валерій Кременицький,Світлана Сперкач

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

Results of the application of the method of scanning electron microscopy in the study of metal fragments of the 9M723 operational-tactical missile OTМK 9K720 «Iskander». (2025). Weapons and Military Equipment, 48(4), 45-50. https://doi.org/10.34169/2414-0651.2025.4(48).45-50

Most read articles by the same author(s)

1 2 3 > >>