Experimental determination of the artillery gun breaking parts of the brake basic parameters affecting its characteristics

Authors
DOI:
https://doi.org/10.34169/2414-0651.2020.4(28).38-47
Keywords:
Array, Array, Array
Abstract

Approach proposing in the article allow the authors to carry out an experimental complex advancement of the hydrodynamic working process of the brake of separate parts with one-hour warning of changes in dynamic and cinematic characteristics to the center of the mass of visible parts. There are two ways of controlling the characteristics of the brake − the change of the total effective passive overflow of the calibrating jets, the slot in the moderator’s valve, or the power of the pulse. On the basis of the method of small ones, the authors proposed the experimental idea of the boundary permissible views of the characteristics of the brake formation, as well as the refinement of the approach to updating the characteristics of the brake of the visible parts.

Author Biographies
  1. Bogdan Ivanovych Adamenko, Head of state shareholder holding company “Artem”

    Chief Designer − Head of state shareholder holding company “Artem”,
    Kyiv, Ukraine

  2. Volodymyr Valerievich Petushkov, Central Scientific Research Institute of Armament and Military Equipment of the Armed Forces of Ukraine

    Chief of Scientific Research department of the development of the tactical and operational-tactical appointment of the Scientific Research management of the development of Armament and Military Equipment of Land Forces of Central Scientific Research Institute of Armament and Military Equipment of Armed Forces of Ukraine

    Kyiv, Ukraine

  3. Oleksandr Anatolyevich Maistrenko, Central Scientific Research Institute of Armament and Military Equipment of the Armed Forces of Ukraine

    Candidate of Technical Sciences,
    Leading Researcher of the Scientific Research department of the development of rocket and artillery Armament and Military Equipment of the Scientific Research management of the development of Armament and Military Equipment of Land Forces Central Scientific Research Institute of Armament and Military Equipment of Armed Forces of Ukraine
    Kyiv, Ukraine

References

Botug, V. Hydraulics. M.: Higher school. 1962. 450 p.

Handbook of the designer-mechanical engineer. Gosnauchtekhizdat, Machine-building literature. 1962. 451 p.

OTR 1.0.3-81. Systems and complexes (samples) of weapons and military equipment. Construction and typical content of normative and technical documents. Basic Requirements, 1981.

Heat- and mass transfer. Heat engineering experiment. Reference. Under the general ed. V. Grigorieva, V. Zorina. M.: Energoizdat. 1982. Pp. 151—191.

Barsukov, S. A device for differentiating and integrating high-frequency characteristics. Coll. scientific works of SibSRI. No. 17. Omsk. 1961. Pp. 14—18.

OTR 1.2.0-83. Systems and complexes (samples) of weapons and military equipment. General requirements for methods of state testing. 1983.

Barsukov, S. & Anisimov, V. Strain gauge for measuring gas pressure in a diesel cylinder. Dynamics of systems. Omsk: OMPI. 1975. No. 2. Pp. 120—122.

Turichin, A. Electrical measurements of non-electrical quantities. M.−L.: Energiya. 1966. Pp. 310—312.

Pastukhov, B. Experimental study of heat transfer processes. M.: Izd. GEI. 1962. 209 p.

Shilin, G. & Barsukov, S. Working processes of systems with internal heat release. Omsk: Zap. - Sib. Book publ. Omsk branch. 1973. 151 p.

Adamenko, B., Petushkov, V., Maystrenko, O. & Lapitsky, S. (2020), "Mathematical model of the working processes of the hydraulic brakes of the retractable parts of the artillery gun". Weapons and military equipmant, 3(27), pp. 37—42. DOI: https://doi.org/10.34169/2414-0651.2020.3(27).37-42.

Cover Image
Downloads
Published
2020-12-03
Issue
Vol. 28 No. 4 (2020): Weapons and military equipment
Section
ARTILLERY WEAPONS & SMALL ARMS
License

Copyright (c) 2020 Богдан Іванович Адаменко, Олександр Анатолійович Майстренко, Володимир Валерійович Петушков

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

Experimental determination of the artillery gun breaking parts of the brake basic parameters affecting its characteristics. (2020). Weapons and Military Equipment, 28(4), 38-47. https://doi.org/10.34169/2414-0651.2020.4(28).38-47

Most read articles by the same author(s)