Mathematical model of working processes of hydraulic brake of retrainable parts of artillery gun

Authors
DOI:
https://doi.org/10.34169/2414-0651.2020.3(27).37-42
Keywords:
Array, Array, Array
Abstract

The approach proposed in the article allowed the authors to conduct a comprehensive study of the hydrodynamic working process of the brake of the retractable parts with simultaneous observation of changes in the dynamic and kinematic characteristics of the center of mass of the retractable parts. In this case, the need to solve the forward and reverse problems of the run is eliminated. Based on the method of small deviations, the authors proposed a theoretical approach to substantiate the maximum allowable deviations of the brake characteristics, which allows to form the relationship of the brake process of retractable parts with the stability of the gun, as well as refi ned methods of restoring language of stability of the gun with the specifi ed characteristic.

Author Biographies
  1. Bogdan Adamenko, Head of state shareholder holding company “Artem”

    Chief Designer − Head of state shareholder holding company “Artem”
    Kyiv, Ukraine

  2. Vladimir Petushkov, Central Scientific Research Institute of Armament and Military Equipment of the Armed Forces of Ukraine

    Chief of Research department of the development of rocket armament of the tactical and operational-tactical appointment of the Scientifi c Research management of the development of Armament and Military Equipment of Land Forces of Central Research Institute of Armament and Military Equipment of Armed Forces of Ukraine,
    Kyiv, Ukraine

  3. Olexander Maistrenko, Central Scientific Research Institute of Armament and Military Equipment of the Armed Forces of Ukraine

    Candidate of Technical Sciences,
    Leading Researcher of the Research department of the development of rocket and artillery Armament and Military Equipment of the Research management of the development of Armament and Military Equipment of Land Forces Central Research Institute of Armament and Military Equipment of Armed Forces of Ukraine,
    Kyiv, Ukraine

  4. Sergey Lapytsky, Central Scientific Research Institute of Armament and Military Equipment of the Armed Forces of Ukraine

    Doctor of Technical Sciences, professor,
    Central Scientific Research Institute of Armament and Military Equipment of the Armed Forces of Ukraine
    Honored Worker of Science and Technology of Ukraine,
    Kyiv, Ukraine

References

Artillery armament / Ed. I. Zhukov. M.: Mechanical Engineering. 1975. 420 p.

Baev, I., Volkov, V., Girya, A., Marinyuk, V. & Tomakhin, E. Theory and calculation of artillery guns. Perm: Uch. Publisher. Type. PVAIU. 1980. 472 p.

Barsukov, S. & Muravyev, V. The working process of the fuel system with a mechanical accumulator plunger drive. Omsk: Zap.-Sib. Book publ. Omsk department. 1971. 168 p.

Barsukov, S. & Knaub, L. Thermodynamics and heat transfer. Odessa: OISV. 1993. 396 p.

Vargaftik, N.B. Handbook on the thermophysical properties of gases and liquids. M.: Nauka. 1972. Pp. 154−300, 410−440.

Limarenko, Yu. L. Development of the theory of working processes of galm of detachable parts with the stiffness of artillery harness 2A65. Science and technology coll. No. 4. P. 2. Odessa: OISV. 1999. P. 54−57.

Limarenko, Yu. L. Theory of small deviations for the analysis of the working process of the brake of retractable parts. Scientifi c and technical coll. № 5. P. 2. Odessa: OISV. 1999.

Anisimov, V., Volkov, K., Denisikhin, S. & Emelyanov, V. Modeling of problems of internal ballistics of power plants by means of modern computer packages. Chemical physics and mesoscopy. 2006. Vol. 8. № 3. Pp. 327−335.

Cover Image
Downloads
Published
2020-09-30
Issue
Vol. 27 No. 3 (2020): Weapons and military equipment
Section
ARTILLERY WEAPONS & SMALL ARMS
License
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

Mathematical model of working processes of hydraulic brake of retrainable parts of artillery gun. (2020). Weapons and Military Equipment, 27(3), 37-42. https://doi.org/10.34169/2414-0651.2020.3(27).37-42