Evaluation of efficiency of new information technology application at the project of aviacosmic techniques

Bashkirov, O. M., Zimin, V. Ye. and Kovalenko S. O. (2006), “Avtomatyzovanyy kompleks planuvannya tekhnichnoho obsluhovuvannya ta remontu aviatsiynoyi tekhniky” [Automated complex of planning of technical maintenance and repair of aviation engineering], Academy work, No. 69, pp. 127-134.

Boytsov, B. V., Borisov, V. D., Kiselev, N. M. and Podkolzin V. G. (2005), “Zhiznennyy tsikl i realizatsiya letatelnogo apparata” [Life cycle and implementation of the aircraft], Moscow Aviation Institute (State Technical University), Moscow, p. 519.

Kozyrev, M. A. (2004), “Avtomatizatsiya proyektirovaniya sistem intellektualnogo analiza dannykh v sfere energetiki i regionalnogo upravleniya” [Automation of the design of data mining systems in the field of energy and regional management: dissertation], Ivanovo, p. 212.

Shapot, M. (2008), “Intellektualnyy analiz dannykh v sistemakh podderzhki prinyatiya resheniy” [Intelligent data analysis in decision support systems], Open Systems Journal, No. 1, рр. 30-35. Available at: http://www.osp.ru/os/1998/01/179360/ (accessed 12 April 2019).

Tsygankova, M. A. and Tsapko, Ye. A. (2013), “Mezhdunarodnyy CALS-standart ISO 10303 STEP v proizvodstve i upravlenii” [International CALS-standard ISO 10303 STEP in production and management], Collected Works of the XI International Scientific and Practical Conference “Youth and modern information technology”, National Research Tomsk Polytechnic University, Tomsk, рр. 400-402.

Buriakov, A. A. (2006), “Vzaimodeystviye prikladnogo informatsionnogo obespecheniya pri formirovanii geometricheskogo oblika magistralnogo samoleta” [Interaction of applied information support in the formation of the geometric appearance of the main aircraft: dissertation], Moscow, p. 216.

CALS-технології. Available at: http://studme.com.ua/1581102610906/menedzhment/cals_-tehnologii.htm. (accessed 12 April 2019).

CALS (Continuous Acquisition and Life cycle Support). Available at: https://uk.wikipedia.org/wiki/CALS.

Ushakov, D. V. “Tekhnologii variatsionnogo proyektirovaniya dlya razrabotki tipichnykh prilozheniy SAPR” [Variational design technologies for the development of typical CAD applications.] Available at: http://isicad.ru/uploads/LGS_Toolkits_Whitepaper.pdf. (accessed 12 April 2019).

Boychun, S. E., Maistrenko, O. A. and Lapytskyi, S. V. (2019), “CALS/PLM tekhnolohiyi proektuvannya i suprovodzhennya zhyttyevoho tsyklu vyrobiv aviakosmichnoyi haluzi” [CALS / PLM technology for designing and maintaining the life cycle of products in the aerospace industry], Coll. scientific works of CSRI AME AF of Ukraine, No. 1(72), рр. 65-74.

Bratukhin, A. G., Davydov, Yu. V., Yeliseyev, Yu. S., Pavlov, Yu. B. and Surov, V. I. (2000), “CALS (Continuous Acquisition and Life cycle Support – nepreryvnaya informatsionnaya podderzhka zhiznennogo tsikla produktsii) v aviastroyenii” [CALS (Continuous Acquisition and Life Cycle Support) in the aircraft industry], Moscow Aviation Institute, Moscow, p. 304.

“Integratsiya dannykh ob izdelii na osnove IPI/CALStexnologiy” [Integration of product data based on IPI (information support for product manufacturing) / CALS-extensible], Part 1, (2002), European Center for Quality, p. 174.

Sudov, Ye. V. and Levin, A. I. (2002), “Kontseptsiya razvitiya CALS-tekhnologiy v promyshlennosti Rossii” [Concept of development of CALS-technologies in the Russian industry], research Center CALS “Applied Logistics”, Moscow, p. 130.

The STEP Standard – ISO 10303. Available at: https://www.researchgate.net/publication/220517554_Introduction_to_ISO_10303_-_the_STEP_Standard_for_Product_Data_Exchange_pp.

The Standard – ISO 13584 (plib). Available at: https://www.sis.se/api/document/preview/912894/

The Standard – ISO 15531 (mandate). Available at: https://www.researchgate.net/publication/220171079_ISO_15531_MANDATE_a_standardised_data_model_for_manufacturing_management.

Borodulin, Yu. B., Gusev, V. A. and Popov, Gn. V. (1987), “Avtomatizirovannoye proyektirovaniye silovykh transformatorov” [Automated design of power transformers], Energoatomizdat, Moscow, p. 264.

Pavlovskyi, I. V., Tverdokhlibov, V. V. and Bashkirov, O. M. (2017), “Proposals for the improvement of the logistics system of the Armed Forces of Ukraine”, Weapons and military equipment, No. 1(13), pp. 50-54. DOI: https://doi.org/10.34169/2414-0651.2017.1(13).50-54.

Federal Information Processing Standards Publication 184 1993 December 21 Announcing the Standard for INTEGRATION DEFINITION FOR INFORMATION MODELING (IDEF1X). [Електронний ресурс]. Available at: http://www.idef.com/wp-content/uploads/2016/02/Idef1x.pdf

FIPS 183 (IDEF/0), Draft Federal Information Processing Standards Publication 183. 1993 December 21. Announcing the Standard for INTEGRATION DEFINITION FOR FUNCTION MODELING (IDEF0). Available at: http://www.idef.com/wp-content/uploads/2016/02/idef0.pdf.

Trofimov, V. V. (2018), “Informatsionnyye tekhnologii v ekonomike i upravlenii” [Information technologies in economics and management], Part 1, Yurait Publishing House, Moscow, p. 269.